How to Repair an Exterior Door

All doors, both exterior and interior, are essential for a certain level of security and privacy. However, the exterior door seems to bear more weight, and it must always be in good shape. Here is how you can make sure the door is usually in perfect condition.

Read more

How to Repair Door Bell

A few reasons can explain why your doorbell has stopped working, and these reasons can be corrected and get your doorbell back to its perfect state. Here are some of the common problems with doorbells and how they can be fixed with door repair service.

How to Repair Door Bell

Read more

How to Repair a PVC Door Lock

While most PVC door locks are very strong and long-lasting, there reaches a point when they get weak and break, or when something happens, and you need to repair it. This can sometimes be expensive depending on the type of lock you have. However, there is always the choice of doing it yourself, and we will talk about the step by step process of doing so.

How to Repair a PVC Door Lock

Read more

How to Repair a Torn Screen Door

Screen doors not only allow light into the house, but they also keep birds or insects from getting in. However, what good is the door if it cannot do its work because of a simple tear? If you have this problem and would like to know how the Top Door Repair can be done, here are a few helpful tips.
Read more

How to Repair Outside Door Frame

A few reasons can make you change your door frame, and the two most common ones are because the frame is broken or it is rotten. Both of these problems have easy to apply solutions which you can effortlessly do on your own. Here are some of the ways to to make a door repair.

How to Repair Outside Door Frame

Read more

How to Repair Bifold Door

Bifold doors are not only fashionable, but they are also great space savers. However, as convenient as the bifold doors may seem, after some time of use they will start losing their convenience, and they will sag, or scrape the floor. If you are reading this article, then you probably have this problem. Have a look at some of the ways through which you can fix the problem on your doors and bring them back to proper functionality.

How to Repair Bifold Door

Read more

How to Repair Door Lock Cylinder

Entryway locks are mind-boggling components with loads of small moving parts and, in that capacity can glitch once in a while.

When the key fails to work accordingly, it is better to confirm first that the key that you are using is the right one. After confirming, it being the right one, then patience will have to play a bigger part rather than rushing to have it broken. After opening the door, try to check what was wrong with the door, and it is at his particular point that you can call the Top Door Repair Toronto to have it checked for you.

How to Repair Door Lock Cylinder

Dry lock or key

If it the key that has the problem, then lubricate the lock and clean it because it may be the one with the problem. For the case of the key, use graphite to coat it and try now and then in the cylinder several times.

A problem with the tang and jolt

On the off chance that the key does not open the lock, dismantle the lock so you can make certain the tang has connected appropriately with the jolt. Grease up the moving segments with graphite, at that point supplant any messed-up parts and reassemble the lock.

Is the lock frozen?

Check if the lock is frozen. On the off chance that the key would not go into the lock, inquire as to whether the climate is cold enough for the lock to be solidified. On the off chance that it is, hold the key with overwhelming love and warmth it using a lighter, and afterward, work it step by step into the keyway. Continue warming and embedding the key until the ice has dissolved.

Harsh spots on new keys

Is the key new? Another key that won’t go in or turn the lock appropriately may have harsh spots that should be documented off. To discover them, hold the key over a flame to darken it with ash and afterward turn it in all respects somewhat in the lock and evacuate it. Scrape down any glossy regions where the residue was.

Sometimes the new keys do have some parts which are not properly shaped, and this can be hard to deal with. But off the shoot is one proven way which you can use to correct the places that do not shape. When scraping those places, take care not to cut it to the point you destroy the whole key. In case you are not good with the cutting, better call a locksmith to work it out for you with
ease.

In some of the cases that the cylinder needs proper work, remove the cylinder and take it to the locksmith to have a proper check of it. This will indeed assist in solving the problem and coming up with the well-secured cylinder. In the case that even the locks do not work even of the previous tenants, it is well-advised that you change the lock and the cylinder.

How to Repair Cracked Door Frame Hinge

Breaks on doors tend to be a regular issue. Specifically, the sideways that the pivots attached to the entryway will in general break in some circumstances. It is ordinarily caused by an object being in between the entryway and frame, and without your knowledge, you just shut the entryway. The impact pulls the pivot sideways, hence breaking the door slightly.

Read more

How to Repair a Kicked Door

It is very unfortunate if you have ever been a culprit of this unacceptable and destructive act of kicking down someone’s door. However, no need to worry much in case yours or your neighbor’s door has been kicked down, because it is not as worse as it may look and it can be fixed with a few simple solutions. The kick can have a greater impact on the door, and it can loosen the door from its tracks by inches and thus affect the door’s movement. You can more often than not fix a kick-in door frame by sticking it back together.

Read more

How to Repair A Shower Door

The tumbling off of the tracks of a shower entryway would not only harm the components of the door but the track too. However, it can also display a genuine risk of broken glass in the shower. The modification of the entryway is essential so that any accidents are prevented. This can be done in a short period in which the property owners can handle using a screwdriver or may use Top Door Repair Toronto services.

Read more